show alarm database

Show the contents of alarm-log buffers.

Syntax

show alarm database [alarm-id WORD<0-32>] [alarm-status WORD<0-32>] [alarm-type WORD<0-32>] [event-code <0x0-0x00FFFFFF | 0x0-0x0>] [module WORD<0-100>] [severity WORD<0-25>]

Command Parameters

alarm-id WORD<0-32>: Filters by alarm ID.
alarm-status WORD<0-32>: Filters by alarm status.
alarm-type WORD<0-32>: Filters by the type of alarm.
event-code <0x0-0x00FFFFFF | 0x0-0x0>: Filters by the event code.
module WORD<0-100>: Filters by module.
severity WORD<0-25>: Filters by severity.

Default

None

Command Mode

User EXEC

Example

The following example displays the local alarms.

Switch:1>show alarm database
       ALARM         EVENT          ALARM       ALARM                          CREATION  UPDATED         CLEARED 
SLOT   ID            CODE           TYPE        STATUS        SEVERITY  FREQ   TIME      TIME            TIME        REASON
----------------------------------------------------------------------------------------------------------------------------
CP1  00300001.238    0x0000c5e7    DYNAMIC       SET          INFO       1      [11/17/15 06:42:55.928]  [11/17/15 06:42:55.928]  [--/--/-- --:--:--.---]  Link Down(1/47)
CP1  00300001.239    0x0000c5e7    DYNAMIC       SET          INFO       1      [11/17/15 06:42:55.946]  [11/17/15 06:42:55.946]  [--/--/-- --:--:--.---]  Link Down(1/48)
CP1  00300001.241    0x0000c5e7    DYNAMIC       SET          INFO       1      [11/17/15 06:42:55.971]  [11/17/15 06:42:55.971]  [--/--/-- --:--:--.---]  Link Down(1/50)
CP1  00400005        0x000045e5    DYNAMIC       SET          INFO       1      [11/17/15 06:43:41.929]  [11/17/15 06:43:41.929]  [--/--/-- --:--:--.---]  Sending Cold-Start Trap